Amorphous CoO/Al2O3/C hybrid as anode material for fast-charging Li-ion batteries

Amorphous CoO/Al2O3/C hybrids were synthesized using a simple pyrolysis method at various temperatures and reagent ratios. At 500 °C, CoO localized from homogenous distribution to quantum dots (∼10 nm) on the Al2O3/C matrix. X-ray photoelectron spectroscopy results suggested that the feed nitrate ions doped the hybrids with pyridinic (398.8 eV) and pyrrolic (400.55 eV) N, which ameliorated the electrochemical performance of the hybrids. The optimum pyrolysis temperature to obtain a reversible capacity of 0.45 Ah g−1 at the 1000th cycle at a current density of 1 A g−1 was 500 °C. However, owing to the polarization electrode, the specific capacity decreased by 54 % after increasing the material mass loading (0.5–3 mg cm−2), which resulted in a maximum areal capacity of 0.78 mAh cm−2. After regulating the C content in the hybrid, the loss in reversible capacity was only 29 % for an eight-fold gain in the mass-loading (0.4–3.2 mg cm−2) and the areal capacity was up to 1.13 mAh cm−2. The specific capacity of the optimized electrode was 0.52 Ah g−1 at the 1000th cycle. In addition, it only lost 28 % of its capacity along with a ten-fold increase in current density (0.2–2 A g−1). In a full cell test involving a LiNi0.8Mn0.1Co0.1O2-based cathode and a CoO/Al2O3/C-based anode, 91 % of the maximum theoretical specific capacity was obtained, whereas the capacity retention at the 100th cycle was 97 %. Electrochemical impedance spectra suggested that small resistances (<38 Ω) and high Li+ diffusivity (5.5–6.8×10−11 cm2 s−1) supported the fast-charging properties of the hybrid.