Droplet Deposition and Efficacy of Real-Time Variable-Rate Application of Herbicides at Reduced Dose in Winter Wheat Fields

Using an intelligent plant protection machine for spraying herbicides at a real-time variable rate plays a key role in improving the utilization efficiency of herbicides and reducing environmental pollution. Spraying volume (SV) and nozzle size (NS) are key factors influencing droplet deposition and herbicide efficacy and safety. A three-way split-split plot design experiment was conducted in the winter wheat field, with SV 180 L center dot ha-1 and 150 L center dot ha-1 in the main plot, a turbo air induction nozzle TTI11004 and TTI11003 in the subplot, herbicide flucarbazone-Na 70% WG mixed with florasulam 50 g center dot L-1 SC as the recommended dose, and a 20% reduced dose in the sub-subplot. Droplet deposition and weed control efficacy treated by these three factors and their combination were evaluated. Results indicated that there was a significant influence of SV on droplet coverage and density, but no significant influence of NS and its interaction with SV. A droplet coverage and density of treatment at 180 L center dot ha-1 were both significantly higher than at 150 L center dot ha-1. The influence of SV and its interaction with NS on weed control efficacy were significant. The efficacy of treatment TTI11004 at SV 180 L center dot ha-1 was the highest but decreased when NS was switched to TTI11003 and the SV was decreased to 150 L center dot ha-1. There was no significant effect of all the treatments on winter wheat yield and its components, but the yield loss could be reduced by 2.36% when the herbicide input was reduced by 20%. We can conclude that herbicide input can be reduced by at least 20% using the intelligent machine while equipped with the right NS at the right SV, which would increase the safety of winter wheat production.