High resistivity under colossal permittivity SrTiO3 based ceramic via controlling ion diffusion

High-performance Sr0.99La0.01TiO3 ceramics were synthesized using a conventional solid-phase method, and Sr0.99La0.01TiO3 percolated (SLT10-P) samples with excellent resistivity were obtained by coating with an oxidant and heat treatment. In this work, simultaneous excellent dielectric properties (16667 of dielectric permittivity, 0.016 of loss tangent at 1 kHz) and high resistivity (1.44 × 1011 Ω cm at DC100V) was achieved in SLT10-P ceramics at room temperature by modulating the duration of thermal treatment. X-ray Diffraction and scanning electron microscope analyses proved the diffusion of the oxidant in the grains and grain boundaries during the heat treatment. The increase in grain boundary resistance is mainly due to the fact that the insulating layer formed by the oxide ions entering the grain boundary hinders the long-range movement of electrons. In addition, the diffusion of oxygen from the air into the ceramic during the heat treatment process also contributes to the insulation of grain boundaries.