How do the main components influence the VOCs emission characteristics and formation pathways during moso bamboo heat treatment?

Bamboo heat treatment will cause plenty of release of volatile organic compounds (VOCs) into the atmosphere which are important precursors for ozone (O-3) formation. In this study, dewaxed bamboo was heat-treated at 180 degrees C for 2 h to investigate the emission characteristics and the formation pathways of VOCs during heat treatment by removing different main components. The results showed that aldehydes (22.61%-57.54%) and esters (14.64%-38.88%) are the primary VOCs released during heat treatment. These compounds mainly originate from the degradation of hemicellulose, lignin, cellulose, and the linkage bonds between them in bamboo. During the bamboo heat treatment, the degradation of C=O, C-H, and C-O bonds in hemicellulose results in the release of 5-hydroxymethylfurfural, 3-furfural, and 1-(+)-ascorbic acid 2,6-dihexadecanoate. The breakage of benzene ring group and the C-O and C-H bonds of lignin leading to the emission of VOCs including m-Formylphenol, Vanillin, and Syringaldehyde. The degradation of aliphatic C-H, C-C, and C-O bonds in the amorphous region of cellulose contributes to an enhanced release of alcohols, olefins, and alkanes. It is calculated that acids (28.92%-59.47%), esters (10.10%-22.03%) and aldehydes (17.88%-39.91%) released during heat treatment contributed more to Ozone Formation Potential (OFP).