Printable Liquid Metal Foams That Grow When Watered

Pastes and "foams" containing liquid metal (LM) as the continuous phase (liquid metal foams, LMFs) exhibit metallic properties while displaying paste or putty-like rheological behavior. These properties enable LMFs to be patterned into soft and stretchable electrical and thermal conductors through processes conducted at room temperature, such as printing. The simplest LMFs, featured in this work, are made by stirring LM in air, thereby entraining oxide-lined air "pockets" into the LM. Here, it is reported that mixing small amounts of water (as low as 1 wt%) into such LMFs gives rise to significant foaming by harnessing known reactions that evolve hydrogen and produce oxides. The resulting structures can be approximate to 4-5x their original volume and possess a fascinating combination of attributes: porosity, electrical conductivity, and responsiveness to environmental conditions. This expansion can be utilized for a type of 4D printing in which patterned conductors "grow," fill cavities, and change shape and density with respect to time. Excessive exposure to water in the long term ultimately consumes the metal in the LMF. However, when exposure to water is controlled, the metallic properties of porous LMFs can be preserved. Mixing small amounts of water into liquid metal-matrix pastes (liquid metal foams, LMFs) can give rise to significant foaming due to reactions that evolve hydrogen and produce oxides. The resulting LMFs are porous, electrically conductive, and responsive to environmental conditions. This expansion can be utilized for a type of 4D printing in which patterned conductors "grow", fill cavities, and shape-morph over time. image