Uniform Li Deposition through the Graphene-Based Ion-Flux Regulator for High-Rate Li Metal Batteries

Lithium (Li) metal is considered an ultimate anode owing to its high specific capacity and energy density. However, uncontrolled Li dendrite growth and low Coulombic efficiency have limited the application of Li metal. Among various strategies introduced to address these limitations, the surface modification of polyolefin separators with functional materials has been widely adopted for improving the mechanical and thermal stabilities of polymer separators and to protect the separator from the penetration of Li dendrites. Herein, we report a new functional polymer separator that is surface-altered with a graphene-based Li-ion flux regulator (GLR) to homogenize the Li-ion flux and suppress the growth of sharp dendritic Li in Li metal batteries. The nanopores distributed through the GLR structure serve as channels for ion transport and junctions for electron transfer, facilitating efficient electrolyte penetration and rapid charge transfer between graphene (Gr) sheets. Owing to these favorable features of porous GLR, a Li-Cu cell with the GLR surface-altered polypropylene separator (GLR-PP) delivers excellent cycle and rate performances compared to a Li-Cu cell with a Gr surface-altered polypropylene separator. In addition, among the tested cells, Li-sulfur cells with GLR-PP exhibit the most stable cycle performance over 500 cycles. These results demonstrate that the concept of tailoring the surface of a polymer separator with porous 2D materials is an effective strategy for improving the long-term cycle stability and electrochemical kinetics of Li metal-based batteries and would trigger further relevant studies.