Five year operation of a cooler Dewar assembly for infrared scanner on board GCOM-C

Global Change Observation Mission – Climate (GCOM-C) “Shikisai”, a satellite designed to observe global climate change, was launched from Tanegashima Space Center on December 23, 2017 by an H2A launch vehicle. The Second-generation GLobal Imager (SGLI) on GCOM-C is a multi-channel optical sensor for observing aerosols, vegetation, and temperatures. Through long-term monitoring, our understanding of climate change mechanisms will be improved. The infrared scanner (IRS) on SGLI has a Thermal InfraRed (TIR) detector requested to operate at 55 K. A Cooler Dewar Assembly (CDA) developed to keep the detector at 55 K is designed to minimize the heat load for the small cooler. The detector is supported on a thermal isolator made of Glass FRP and is thermally connected to the cooler by flexible thermal link. The Cooler Control Electronics (CCE) uses a heater to compensate heat load fluctuations, thereby maintaining temperature and stability. The heater power decreases gradually during five years, consequently decreasing the cooling power. Despite that cooler degradation, the detector temperature has been maintained at 55 ± 0.1 K for 5 years in orbit and has continued operating with 36 W power consumption. This paper describes the cooler Dewar Assembly and its five years of operation in orbit.