Unraveling the complex interactions between structural features and reactivity of iron-based catalysts across various supports in the synthesis of light olefins from syngas

This study provides a systematic examination of the hydrogenation of CO over mixed Fe-Co-K catalysts on SiO2, TiO2, and Al2O3 supports for the production of light olefins. The unsupported FeCo/K catalyst, while demonstrating selectivity towards light olefins, yielded a low space-time yield (STY) for hydrocarbon formation. Additionally, the Fe3O4 phase in the spent catalyst appeared to promote an increased rate of CO2 formation. The SiO2-supported catalyst showed a high dispersion of isolated Fe particles but were less effective in synthesizing light olefins. The interaction of Fe species with TiO2 support was found to be strong, impeding the formation of the active Fe5C2 phase and thus lowering the yield of light olefins. Al2O3 stood out as the most effective support, ensuring an optimal dispersion of the Fe phase with minimal interaction, enabling the Fe to effectively synergize with K. This synergy promoted the formation of the iron carbide Fe5C2 phase, essential for efficient CO hydrogenation to light olefins, and achieved a notable STY of 17.2 mmol gcat -1 h-1 at 360 degrees C and 20 bar. Long-term stability testing underscored the influence of reaction temperature on light olefins yield, with paraffin wax formation at 300 degrees C leading to catalyst deactivation through adsorption and accumulation. Conversely, at 360 degrees C, a distinct carbon layer was observed, forming an extended structure that did not directly cover the catalyst's surface. These findings contribute valuable knowledge for the custom development of catalysts tailored for light olefins production from syngas, offering a promising avenue for future research.