Performance investigation and optimization of latent heat exchanger with pin fins based on non-uniform deployment strategy

Latent heat storage technology is an essential way of efficiently utilizing industrial residual heat, which helps to the objective of carbon neutrality in all countries. In this work, latent heat exchangers with pin fins are numerically investigated based on non-uniform deployment strategy and then optimized according to response surface method. The influences of rotation angle, non-uniform fin pitch, non-uniform fin length and combination of phase change materials with different melting temperatures on thermal storage performance are studied. Results show that the increment of rotation angle facilitates the reduction of complete melting time, and the optimal angle accelerates the melting speed by 10.3% compared to the 0 degrees angle. The arrangements of gradually decreasing fin pitch and gradually increasing fin length along flow direction of heat transfer fluid improve the heat storage performance, which can reduce the complete melting time by 7.3% and 22.2% respectively, compared to the uniform arrangement. The multiple phase change materials latent heat exchanger with high melting temperature phase change material placed in high temperature region and low melting temperature phase change material in low temperature region can make better utilization of heat from heat transfer fluid, which can improve the melting speed by 16.8% compared with the single phase change material latent heat exchanger. The optimized latent heat exchanger based on response surface method reduces the complete melting time by 23.4% compared to the original model. In conclusion, the heat storage performance of latent heat exchanger with pin fins effectively improved by adopting the non-uniform deployment strategy.