A novel foaming additive derived from waste polyethylene terephthalate (PET) for low-carbon warm mix asphalt
RESOURCES CONSERVATION AND RECYCLING(2024)
摘要
Plastic pollution is growing relentlessly due to the careless disposal of waste plastic products. This study focuses on converting waste plastic bottles into a foaming additive for the production of eco-friendly warm mix asphalt (WMA) for paving purposes. The additive, namely PET-TETA, was synthesized from waste polyethylene terephthalate (PET) via an aminolysis process. Its chemical and physical properties were characterized by the scanning electron microscope (SEM), X-ray diffractometer (XRD), and thermogravimetry-differential thermal analyzer (TG-DTA) tests. The WMA mixtures were prepared using PET-TETA and a commercial foaming additive, and their properties were studied and compared to a conventional hot mix asphalt mixture. The performances of the asphalt mixtures were characterized through the indirect tensile stiffness modulus, moisture susceptibility, and immersion Hamburg wheel-tracking tests. The findings revealed that PET-TETA was a semicrystalline material containing approximately 26 % hydration water, which could be released gradually during the preparation of asphalt pavements. The performance of the WMA mixture utilizing PET-TETA was comparable to the other two asphalt mixtures, and it exhibited higher strengths and better resistance to stripping. Therefore, it is promising to apply PET-TETA as a sustainable and effective WMA additive for paving purposes, providing a solution to the issue of waste plastic disposal.
更多查看译文
关键词
Asphalt pavement,Warm mix additive,Waste plastic,Physical and chemical properties
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要