Limonite as a Natural Adsorbent for the Removal of Antimony(III) from an Aqueous Solution

Natural limonite, which contains mainly nano-sized iron and manganese oxides, is widely distributed worldwide. This study investigated the kinetics, thermodynamics, and the effects of pH, ion strength, and anions on the adsorption of Sb(III) via limonites sampled from Xinqiao and Yeshan (Tongling, China). Results show that adsorption equilibrium is achieved after 24 h for all experiments. Under initial Sb(III) = 200 mg/L, pH = 3.0, and temperature = 25 degree celsius, Sb adsorption quantities for X1 (Mn-free limonite from Xinqiao), X2 (Mn-containing limonite from Xinqiao), Y1 (Mn-free limonite from Yeshan), and Y2 (Mn-containing limonite from Yeshan) are 10.92, 12.97, 27.12, and 89.34 mg/g, respectively. Manganese oxides in limonites promote Sb removal through oxidizing Sb(III) to Sb(V). The adsorption processes for all four limonites are fitted with a pseudo-second-order model. All adsorptions except for X1 fit with the Freundlich model; for X1, the Langmuir adsorption model is better. All adsorptions are spontaneous reactions (Delta G < 0). All adsorptions except for Y1 (Delta H < 0, exothermic reaction) are endothermic reactions (Delta H > 0). Antimony adsorption is independent of solution pH for Mn-free limonites but is negatively related to solution pH for Mn-containing limonites. Generally, ion strength has a weak positive effect on Sb adsorption. The effects of anions on Sb adsorption are grouped into three types: weak negative (NO(3)(- )and SO42-), negative (CO32-, SiO44-, and PO43-), and equivocal (humic acid). This study indicates that due to a much higher surface area, Yeshan (124.8 m(2)/g for X1 and 171.7 m(2)/g for X2) rather than Xinqiao (13.7 m(2)/g for Y1 and 12.8 m(2)/g for Y2) limonites are better materials for Sb(III) removal in an aqueous solution. The key factors for the better use of limonite as an Sb(III) treatment material include temperature, pH, ion strength, and Mn content.