A passively self-adjusting floating wind farm layout to increase the energy production: a sensitivity analysis

Offshore wind farm layout design techniques and methodologies currently focus on fixed bottom offshore wind turbines. As more floating wind farm (FWFs) are planned, new methodologies for FWF layout design and optimization are required to consider the different attributes between fixed bottom and floating offshore wind turbines (FOWTs). One main difference is the ability of FOWTs to move in the horizontal plane (surge and sway motions). In our work in [1], we showed that the motions of the FOWTs in the horizontal plane represent an opportunity which can be used to increase the FWF's annual energy production (AEP). We can passively control the motions of the FOWTs in a FWF according to the incoming wind direction, moving the downwind turbines out of the wake of upwind ones. Since the horizontal motions of a FOWT are governed by the mooring system design (MSD) attached to it, this passive control can be done by designing a customized mooring system (MS) for every FOWT in the farm. In this work we build on our work in [1], as we carry out a sensitivity analysis to check the effect of the farm size and the wind rose on the methodology we introduced. The results show that the percentage increase of energy production due to passively relocating the FOWT is sensitive to the FWF size. Very small FWFs will gain less energy by relocating the FOWTs. Moreover, we show that even with a more uni-directional wind rose relocating the FOWTs in a FWF remains beneficial.