109 Inter- and Intra-Laboratory Comparison of 6 Dustiness Testing Methods: Towards the Development of an OECD Testing Guideline

Abstract Dustiness is a key parameter describing the ability of powder materials to generate dust during agitation. The main goal of this work was to generate and assess the scientific basis for the validation and applicability of 6 dustiness methods to nanomaterials, and development of a subsequent OECD testing guideline. Six dustiness methods (rotating drum, small rotating drum, continuous drop, vortex shaker, fluidizer and venturi) were subjected to an intra- and inter-laboratory comparison (ILC) in which 15 international laboratories participated. ILC tests were conducted for 6 materials (3 TiO2 and 3 SiO2) of different chemical natures and dustiness levels. Each participating laboratory conducted at least 3 replicates per material. Harmonization of procedures, methods and data treatment took place prior to testing. Results from the ILC were assessed considering the different reported metrics such as respirable mass and particle number dustiness index. Overall, the intralaboratory variability for the different methods and metrics was under 30%. Variation between laboratories was generally higher for respirable mass than particle number dustiness index. These variations were mostly attributed to differences in setups such as tubing length or instrumentation. All methods except the venturi, which was characteristic for presenting low differences between materials and opposed classification to the rest of the methods, showed relatively similar material ranking. For all methods and laboratories the calculated z-score (measure of the deviation of each laboratory from the true value) was <2 as based on ISO 13528, which indicates gratifying results. Funding: EU H2020 Research and Innovation Programme under Grant Agreement 814401.