Low-Pressure CVD Synthesis of Tetragonal Borophene Single-Crystalline Sheets with High Ambient Stability

Being a typical graphene-like two-dimensional (2D) material, borophene has received a lot of attention due to its low density, high electron mobility, large Young’s modulus, and good chemical stability. Compared with the corresponding bulk counterparts, 2D borophene has larger specific surface area, higher conductivity, and smaller work function, finding potential applications in high-speed transistors, optoelectronic detection, field emission (FE), and mechanical enforcement areas. In this paper, 2D tetragonal borophene sheets with high ambient stability have been successfully fabricated on the surface of 1 cm2 copper foil using a developed low-pressure chemical vapor deposition (LPCVD) method. The vapor–solid mechanism was used to comprehend the formation of the tetragonal borophene sheets. The electrical conductivity of individual borophene sheets ranged from 4 to 5 × 10–4 S/cm, and the band gap was about 2.1 eV, suggesting their narrow semiconductive nature. Also, the maximum FE current of individual borophene sheets was close to 1 μA, and their emission properties enhanced with the decreasing sheet thickness, comparable to many other nanomaterials with excellent FE performances. More interestingly, individual borophene sheets were found to retain good enough electrical transport and FE behaviors even if they experienced several days’ atmospheric conservations. Our research results suggest that the LPCVD-grown borophene may be a promising building block for constructing high-performance nanodevices with good ambient stability.