Artificial intelligence–built analysis framework for the manufacturing sector: performance optimization of wire electric discharge machining system

In the era of industry 4.0, digitalization and smart operation of industrial systems contribute to higher productivity, improved quality, and efficient resource utilization for industrial operations and processes. However, artificial intelligence (AI)–based modelling and optimization analysis following a generic analysis framework is lacking in literature for the manufacturing sector thereby impeding the inclusion of AI for its potential application's domain. Herein, a comprehensive and generic analysis framework is presented depicting the key stages involved for carrying out the AI-based modelling and optimization analysis for the manufacturing system. The suggested AI framework is put into practice on wire electric discharge machining (WEDM) system, and the cutting speed of WEDM is adjusted for the stainless cladding steel material. Artificial neural network (ANN), support vector machine (SVM), and extreme learning machine (ELM) are three AI modelling techniques that are trained with meticulous hyperparameter tuning. A better-performing model is chosen once the trained AI models have undergone the external validation test to investigate their prediction performance. The sensitivity analysis on the developed AI model is performed and it is found that pulse on time (P on ) is the noteworthy factor affecting the cutting speed of WEDM having the percentage significance value of 26.6 followed by the D w and LTSS, with the percentage significance value of 17.3 and 16.7 respectively. The parametric optimization incorporating the AI model is conducted and the results pertain to the cutting speed are 27.3% higher than the maximum value of cutting speed achieved for WEDM. The cutting speed performance optimization is realized following the proposed AI-based analysis framework that can be applied, in general, to other manufacturing systems therefore unlocking the potential of AI to contribute to industry 4.0 for the smart operation of manufacturing systems.