Experimental Study on the Relationship between the Degree of Surrounding Rock Fragmentation and the Adaptability of Anchor Support

Taking the roadway peripheral rock anchoring unit as the research object, the rock compression test containing the anchor solid was carried out to analyze the influence of the degree of peripheral rock fragmentation and the anchor support method on the mechanical properties of the rock body. The test results showed that the smaller the size of the structural surface, the more a greater number of anchor rods were needed, which in turn provided better support. With the increase in the size of the structural surface, the uniaxial compressive strength and modulus of elasticity of the specimen showed a gradual decrease. Numerical tests of the uniaxial compression of rock containing cohesive units showed that the deformation of the specimen near the anchor bar was significantly reduced, while the main rupture surface was blocked, and an obvious reinforcement zone was formed near the anchor bar. Under the double-anchor condition, the anchor tension stress was more obvious, the reinforcement zone was wider, and the rock rupture surface was strongly blocked, all of which made its reinforcement effect the more obvious. This double-anchor condition showed that the anchoring effect of the anchor rods on the specimens was reflected in two aspects of reinforcement and crack stopping. The denser the anchor rods, the wider the reinforcement zone and hence the more likely that the superposition effect will occur, which allowed the anchor rods to play a greater supporting role in stabilizing the rock. The research results can provide a theoretical basis for the design of anchor support and early warning prediction of destabilization damage in the fractured surrounding rock of coal mine roadways.