Energy efficiency analysis and optimization of a pressurized oxy-fuel circulating fluidized bed combustion system

The commercial application of oxy-fuel combustion technology is limited by energy deduction which is caused by addition of air separation unit (ASU) and carbon dioxide compression and purification unit (CPU). Pressurized circulating fluidized bed (CFB) oxy-fuel combustion technology is one option to improve the net electric generation efficiency. In this research, a series of simulations and optimizations were carried out to analyze the energy efficiency of a pressurized oxy-fuel combustion system. The boiler structure and heat exchange surface arrangement under different pressure were calculated. The cross-sectional area of the furnace and tail flue were both reduced up to 10 % of the original size and the floor space of the boiler was considered to be the lowest at 1.1 MPa. The energy efficiency and exergy analysis were used to explore the influence of pressure on the net efficiency and the optimization potential of system. The net electric generation efficiency reached a maximum value of 24.16 % at 1.1 MPa, which is 5.4 % higher than that at atmospheric pressure. Finally, four parameters, i. e. preheat temperature, oxygen concentration, ASU outlet oxygen purity and CPU compressor outlet pressure, were optimized to improve the system net efficiency to 26.67 %, 29.04 %, 25.87 % and 24.36 %, respectively.