Dispersion-boosting wideband electromagnetic transparency under extreme angles for TE-polarized waves

Half-wave wall is the most common method of achieving electromagnetic (EM) transparency. Transmission windows can be formed when reflected waves are out of phase. Due to the interference mechanism, these windows are dependent on the frequency and incident angle of EM waves, leading to limited bandwidth, especially under extreme angles. In this letter, we propose to extend the bandwidth of the transmission window under extreme angles by utilizing dispersion. To this end, long metallic wires are embedded into the half-wave wall matrix, without increasing the physical thickness. Due to the plasma-like behavior of metallic wires under TE-polarization, the effective permittivity of the half-wave wall, rather than keeping constant, increases with frequency nonlinearly. Such a dispersion will boost wideband transparency in two aspects. On one hand, an additional transmission window will be generated where the effective permittivity equals that of the air; on the other hand, the 1st- and 2nd-order half-wave windows will be made quite closer. By tailoring the dispersion, the three windows can be merged to enable wideband transparency under extreme incident angles. A proof-of-principle prototype was designed, fabricated, and measured to verify this strategy. Both simulated and measured results show that the prototype can operate in the whole Ku-band under incident angle [70 degrees, 85 degrees] for TE-polarized waves. This work provides an effective method of achieving wideband EM transparency under extreme angles and may find applications in radar, communications, and others.