Thermal, mechanical, and photocatalytic dye degradation performances of the functionalized GO and TiO2 decorated carbon foam composites

Although pitch-derived carbon foam (CF) is not new, but the progress for enhanced thermal, mechanical, and catalytic dye degradations need to be explored. Numerous works were performed to improve the structural morphology and properties of the CFs by dispersing various additives. But mostly it was noticed that such additives enhanced one aspect of the CFs at the cost of other ones. In this work, various additive loadings of the functionalized graphene oxide (FGO), and functionalized titanium dioxide (FTiO2) were synergistically dispersed into the CF matrix via facile pyrolysis for the preparation of CF/FGO and CF/FGO + FTiO2 hybrid composites to improve the structural morphology and properties of the CFs. Functionalization of the graphene oxide (GO) and titanium dioxide (TiO2) nanoparticles (NPs) was performed for the purpose to decrease the possible aggregations, and enhancing the compatibility and interaction between the additives and the CF matrix. A total of seven CF composites including pure CF were synthesized and explored for their structural, thermal, mechanical, and catalytic dye degradation performances. The microstructural investigations revealed that cellular morphology, pore size, shape, and porous homogeneity of the CF composites were significantly improved after the FGO and FTiO2 loadings. The thermal and mechanical behaviors revealed that as the additives loading of the FGO and FTiO2 are increased, the thermal and mechanical responses of the CF composites are significantly improved. The maximum thermal conductivity of 27.9 W/m K was revealed by 4wt.% CF/FGO + FTiO2 hybrid composite. Similarly, the optimum compressive strength of 15.7 MPa, specific compressive strength of 3.5 10 m3, excellent stress–strain, and improved Young's modulus of 42.2 MPa was shown by 4wt.% FGO + FTiO2 hybrid composite. The catalytic activity was evaluated by degrading orange II dye in an aqueous medium under ultraviolet (UV) light irradiation. The TiO2-containing composite was found to be active and the sample with 4wt.% CF/FGO + FTiO2 hybrid composite achieved a significant 78.9% degradation of the dye within just 80 min.