Impact of using type mean vs. individual receiver antenna PCC in multi-GNSS PPP

In the paper, the differences between position components obtained using the precise point positioning (PPP) technique with individual and type mean PCC models were investigated. Daily GNSS observations from ten selected European Permanent Network (EPN) stations were used in the study. Eight different combinations of GPS, Galileo, BeiDou and GLONASS systems observations were proposed for analyses. The observation processing was done using the open-source software package GAMP. The results show that differences in the calibration models propagate to the position domain. Position offsets, resulting from the use of individual calibrations instead of the type mean, reach up to 10 mm in the vertical component while are generally keeping below 2 mm in the horizontal ones. The analysis also shows that adapting GPS PCCs to other GNSS (e.g. Galileo or BeiDou) signals does not significantly increase achieved position component differences.