Advancing power plant decarbonization with a flexible hybrid carbon capture system

Carbon dioxide capturing from natural gas-fired power plants is challenging due to high flow rate and the low carbon dioxide concentration of flue gas. This is an emerging field where many concepts and scientific principles are still in development. In this paper, a novel design is proposed for decarbonizing a natural gas-fired combined cycle power plant using a solar-assisted hybrid membrane-amine carbon capture and storage system. The design incorporates a solar field with thermal energy storage integrated with the capture plant reboiler along with multi-stage carbon dioxide selective membrane modules for selective exhaust gas recirculation (SEGR) combined with exhaust gas recirculation (EGR) to increase the concentration of Carbon dioxide in the flue gas. It is hypothesized that the proposed design could enhance the performance of the power plant integrated with carbon capture in terms of flexibility and sustainability. In this regard, a comprehensive process modeling and simulation framework is developed to accurately investigate the interactions between different components of the integrated process. The results show that the carbon dioxide concentration in the flue gas increases from 3.9 mol % in the conventional power plant to 10.87 mol% in the EGR + SEGR case (26 % of flue gas to EGR and 50 % to SEGR) and increases to 18.08 mol% by the SEGR case (76 % of flue gas to SEGR). Solar thermal energy is an efficient solution for reducing or eliminating the need for steam extraction for the stripper reboiler, resulting in a significant increase in net power output compared to the non-solar cases. The proposed designs lead to a 19.4 % increase in system power output in the SEGR case and a 13.8 % increase in the EGR + SEGR case compared to the baseline case. Also, the specific reboiler duty and required packing material volume in the absorber and stripper are significantly improved in the proposed designs. Moreover, the power plant carbon intensity in the proposed designs can be reduced by up to 10.3 %. The EGR + SEGR case offers an optimal solution as it requires a significantly smaller membrane area, approximately 71 % smaller membrane area compared to SEGR. The proposed designs and analysis have the potential to contribute significantly to the decarbonization of fossilfueled power plants and enhance the sustainability and flexibility of the power sector.