Investigation of the Quenching Sensitivity of the Mechanical and Corrosion Properties of 7475 Aluminum Alloy

Based on end-quenching experiments combined with conductivity, hardness testing, and microstructural characterization, the quenching sensitivity of the mechanical and corrosion properties of 7475 aluminum alloy was investigated. The study revealed that as the quenching rate decreased, both the mechanical properties and exfoliation corrosion resistance exhibited increased quenching sensitivity. With the quenching rate decreasing from 31.9 °C/s to 2.5 °C/s, the conductivity increased by 4.1%IACS, the hardness decreased by 31%, the exfoliation corrosion grade transitioned from EC to ED, and the maximum exfoliation corrosion depth increased from 237 μm to 508 μm. As the quenching rate decreased, the η phase sequentially precipitated at recrystallized grain boundaries (RGBs), E phase particles, and subgrain boundaries (SGBs), while the T phase primarily precipitated on E phase particles. Furthermore, the significant precipitation of η and T phases led to a notable reduction in the quantity of age-precipitated phases, an increase in their size, and poor coherency with the matrix, resulting in decreased mechanical properties and a higher quenching sensitivity of the mechanical performance. Meanwhile, with the reduction in quenching rate, the size and spacing of grain boundary precipitated phases increased, the Zn and Mg contents of grain boundary precipitated phases increased, and the Precipitation Free Zone (PFZ) widened, leading to decreased exfoliation corrosion resistance and higher quenching sensitivity of the exfoliation corrosion performance.