Research on low temperature properties and physical hardening effect of asphalt components

It is generally recognized in current research that asphalt binder is composed of four components, i.e., saturates, aromatics, resins and asphaltenes, and the physicochemical properties of asphalt binder are closely related to the properties of the components. In this paper, solvent precipitation and chromatographic column method were used to extract and separate a sufficient amount of four components, and different components were recombinant according to the original ratio to form components recombinant materials. Using Fourier Transform Infrared, dynamic shear rheometer and differential scanning calorimetry to characterize the chemical composition and low temperature rheological properties of single component and components recombinant materials, including amplitude sweeping, temperature sweeping, time sweeping temperaturefrequency sweeping and relaxation test. The response of the material to the physical hardening effect at low-temperature isothermal storage was also explored. The test results show that, within the test temperature range, the aromatics does not produce physical hardening effect, while the saturates and resins produced a certain degree of physical hardening effect. The free volume, phase angle, and complex shear modulus have different response times to the physical hardening effect, so the free volume theory alone is not sufficient to explain the physical hardening effect. This paper proposes to use the method of area integral to evaluate the degree of response of materials to physical hardening, and to rank the materials.