Cobalt Ferrite Surface-Modified Carbon Nanotube Fibers as an Efficient and Flexible Electrode for Overall Electrochemical Water Splitting Reactions

One of the most practical and environmentally friendly ways to deal with the energy crises and global warming is to produce hydrogen as clean fuel by splitting water. The central obstacle for electrochemical water splitting is the use of expensive metal-based catalysts. For electrocatalytic hydrogen production, it is essential to fabricate an efficient catalyst for the counterpart oxygen evolution reaction (OER), which is a four-electron-transfer sluggish process. Here in this study, we have successfully fabricated cobalt-based ferrite nanoparticles over the surface of carbon nanotube fiber (CNTF) that was utilized as flexible anode materials for the OER and overall electrochemical water splitting reactions. Scanning electron microscopy images with elemental mapping showed the growth of nanoparticles over CNTF, while electrochemical characterization exhibited excellent electrocatalytic performance. Linear sweep voltammetry revealed the reduced overpotential value (260 mV@η) with a small Tafel slope of 149 mV dec. Boosted electrochemical double layer capacitance (0.87 mF cm) for the modified electrode also reflects the higher surface area as compared to pristine CNTF ( = 0.022 mF cm). Charge transfer resistance for the surface-modified CNTF showed the lower diameter in the Nyquist plot and was consequently associated with the better Faradaic process at the electrode/electrolyte interface. Overall, the as-fabricated electrode could be a promising alternative for the efficient electrochemical water splitting reaction as compared to expensive metal-based electrocatalysts.