Effect of the Addition of Porcelain Tile Polishing Residue in Ceramic Masses for Sanitary Ware

Currently, there is a severe shortage of good-quality feldspar deposits. On the other hand, porcelain tile polishing residue has been widely recognized as an alternative raw material for the ceramic industry. Thus, this research evaluated the effect of the partial replacement of feldspar by the porcelain polishing residue (PPR) in formulations for sanitary stoneware. It was replaced from 2% to 20% of the total mass of feldspar by the residue. The raw materials were characterized by X-ray fluorescence, X-ray diffraction, and particle size determination. Then, they were mixed in a wet ball mill, and the rheological properties of the suspensions were analyzed. Samples of the test were produced by slip casting and sintered at 1160 degrees C, 1180 degrees C, and 1200 degrees C. Rheological characteristics were not affected when up to 20% of feldspar was replaced by residue. Bodies with high amounts of PPR had flexural strength and water absorption values similar to those of bodies without PPR in formulations. Furthermore, apparent porosity values lower than the reference mass were obtained with the addition of 6% of the residue in the formulation.