New attempts on acidic anaerobic digestion of poly (butylene adipate-co-terephthalate) wastewater in upflow anaerobic sludge blanket reactor

Poly (butylene adipate-co-terephthalate) (PBAT) wastewater is a highly concentrated, acidic, and toxic waste-water generated from biodegradable plastics production. Large amounts of alkali would be consumed when treating PBAT wastewater by anaerobic digestion due to the low pH value. This study employed acidic anaerobic digestion to treat PBAT wastewater and compared to neutral anaerobic digestion. The results indicated that the COD removal rates in the acidic upflow anaerobic sludge blanket (UASB) reactor were 65.5% and 59.9%, respectively at influent pH 6.0 and 5.0 with the COD concentration of around 11,000 mg L-1, and the methane conversion efficiency were 172.5 and 183.8 mLCH4/gCOD(r) (gCOD(r): COD removed amount), respectively. Correspondingly, the average COD removal and methane conversion efficiency in the neutral UASB reactor were 63.2% and 188.0 mLCH4/gCOD(r), respectively. The treatment efficiency of acidic and neutral UASB reactors for PBAT wastewater was similar. The hydrogenotrophic methanogenic activity was further enhanced in the acidic UASB reactor compared to the neutral one. The increase of alkalinity in the acidic UASB reactor (2.4 mmol L-1) was higher than the neutral (2.0 mmol L-1). A higher level of syntrophic acetate oxidation bacteria and hydrogenotrophic methanogen was enriched in the acidic UASB reactor, ensuring efficient treatment and saving costs.