First-Order Universal Active Filter Configuration Using Single VCII

A new universal active filter configuration is presented in this paper which is capable of realizing all three first-order filter responses namely all pass (AP), low pass (LP) and high pass (HP) using a single second generation voltage conveyor (VCII+), a virtually grounded capacitor and two resistors. The proposed circuit offers tunability of the cut-off frequency, gain (for HP filter) and simultaneous availability of two filter outputs, one at a low impedance node (HP/AP), the other output, namely the LPF will require a voltage buffer to avoid loading. The nonideal analysis of filter responses based on the nonideal model of VCII+ is carried out by considering all the parasitic immittances and nonideal gains and found that they have no significant effect on the performance of the proposed filter structure. Sensitivity analysis with respect to active and passive components has also been carried out. The functionality of the presented circuit has been validated through simulations and experimental results, where the VCII+ was implemented using the macro model of the commercially available CFOA IC AD844. Additionally, the proposed circuit has been tested using a CMOS VCII+ implemented with 0.18 mu m TSMC technology parameters. The tests include advanced evaluations based on Monte Carlo simulations.