Effect of multilayered catalytic bed on temperature profiles and catalytic performance for Fischer-Tropsch synthesis over Co/Al2O3 catalyst in a multitubular fixed-bed reactor

Fischer-Tropsch synthesis (FTS) is a widely recognized process that catalytically converts syngas into higher hydrocarbons and oxygenates, which are ultimately upgraded into transportation fuels and chemicals. Effective temperature control and heat dissipation are crucial considerations due to the exothermic nature of the FT reaction. Underutilization of the catalytic bed is another challenge in fixed-bed reactors. The implementation of a multilayered catalytic bed, with the catalytic activity in an ascending order, has shown positive effects in addressing these issues. It mitigates adiabatic temperature rise, reduces the maximum reactor temperature, and minimizes catalyst deactivation at high tem-peratures. Moreover, this multilayered bed effectively addresses the underutilization issue by ensuring optimal utilization of the entire bed as the catalytic activity transitions from one layer to another during the reaction. Layers with a higher cobalt loading remain active until the completion of the reaction, resulting in minimal fluctuations in CO con-version. To achieve uniform temperature profiles, catalytic activities, and product dis-tributions in all reactor tubes in a multitubular reactor, it is imperative to maintain consistent reaction conditions, utilize the same catalyst loading in all tubes, employ an appropriate heating system, and implement an efficient cooling system to dissipate the heat generated by the exothermic reaction. Furthermore, investigations into the proper-ties of the used catalysts after the reaction indicate that catalyst deactivation primarily occurs due to the deposition of FT products on the catalyst surface and pores and blockage of active cobalt sites, and sintering of cobalt particles.& COPY; 2023 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.