Influence of the Adsorption Bed Composition on the Low-Pressure Fluidization

The paper presents an innovative concept of the fluidization of an adsorption bed carried out under low-pressure conditions. Additionally, different bed mixes were used to test the effects of the bed composition on fluidization. Fluidization was caused by the pressure difference and the velocity of the flowing water vapor. These features make the research presented in this article significantly different from other studies known in the literature and constitute the main novelty of the paper. Silica gel with a particle diameter of 200-250 & mu;m (Geldart group B) with aluminum and carbon nanotube additives was fluidized under reduced pressure (10-25 mbar). The pressure difference results in the flow of water vapor and, consequently, induces fluidization. The pressure in the evaporator was approx. 10 mbar, while in the reaction chamber it was approx. 25 mbar. The pressure difference of about 10-15 mbar allows for a flow of water vapor between the evaporator and the reaction chamber. During the tests, the pressures, temperatures and mass were measured. The pressure drop in the bed was closely related to the mass change in the fluidized bed.