Experimental Study on the Properties of Simulation Materials for an Aquifuge for a Fluid-Solid Coupling Physical Similarity Model Test

Featured Application Similar materials in aquifuge strata have the characteristics of low strength, controllable water absorption, and low permeability. They were used when testing the fluid-solid coupling physical similarity model in the 8210 working area in Majiliang Coal Mine, which verifies their feasibility and applicability in the research. In order to meet the special requirements of physical and mechanical strength and high water resistance of similar material in aquifuge (aquitard) strata for the testing of the fluid-solid coupling physical similarity model for a mine water inrush. Based on the similarity theory of solid-fluid coupling in equivalent homogeneous continuous media, a new type of aquifuge simulation material was developed, which used river sand as the skeleton of the material, gypsum and calcium carbonate powder as the auxiliary cementing agent, and paraffin wax and petroleum jelly as the waterproof cementing agent. Similar materials of aquifuge (aquitard) strata are created according to a specific proportion of the components and an established technological process. Through orthogonal tests and systematic analysis, the influence mechanism of the different proportions of the raw materials on the variation of the physical-mechanical strength and hydraulic parameters is studied in this paper. The experimental results demonstrate when the mass ratio of solid material to liquid material is 8:1 and 9:1, the mass ratios of river sand, calcium carbonate, and gypsum is 30:3:7, 30:3:7, and 50:3:7, and the mass ratios of paraffin wax to petroleum jelly are 1:2, 1:1, and 2:1, respectively. The controlled ranges of uniaxial compressive strength, softening coefficient, and permeability coefficient of the similar materials are 16.99-426.47 kPa, 0.660-0.805, and 1.01 x 10(-7)-8.34 x 10(-7) cm/s, respectively. The above data show that the materials have the characteristics of low strength, controllable water absorption, and low permeability.