Numerical simulation of a managed aquifer recharge system designed to supply drinking water to the city of Amsterdam, The Netherlands

Managed aquifer recharge (MAR) is increasingly used to secure drinking water supply worldwide. The city of Amsterdam (The Netherlands) depends largely on the MAR in coastal dunes for water supply. A new MAR scheme is proposed for the production of 10 × 10 6 m 3 /year, as required in the next decade. The designed MAR system consists of 10 infiltration ponds in an artificially created sandbank, and 25 recovery wells placed beneath the ponds in a productive aquifer. Several criteria were met for the design, such as a minimum residence time of 60 days and maximum drawdown of 5 cm. Steady-state and transient flow models were calibrated. The flow model computed the infiltration capacity of the ponds and drawdowns caused by the MAR. A hypothetical tracer transport model was used to compute the travel times from the ponds to the wells and recovery efficiency of the wells. The results demonstrated that 98% of the infiltrated water was captured by the recovery wells which accounted for 65.3% of the total abstraction. Other sources include recharge from precipitation (6.7%), leakages from surface water (13.1%), and natural groundwater reserve (14.9%). Sensitivity analysis indicated that the pond conductance and hydraulic conductivity of the sand aquifer in between the ponds and wells are important for the infiltration capacity. The temperature simulation showed that the recovered water in the wells has a stable temperature of 9.8–12.5 °C which is beneficial for post-treatment processes. The numerical modelling approach is useful and helps to gain insights for implementation of the MAR.