Effect of the structure of macromonomer in polycarboxylate superplasticizer on slump-retention of concrete

Three kinds of slump-retention polycarboxylate superplasticizers(52HPC4, 52IPC4, and 52EPC4) were synthesized by using HPEG, IPEG, or EPEG as macromonomers. The effects of polycarboxylate superplasticizers on the slump-retention of cement and concrete were investigated. The mechanism of action was explained by the composition of PCE polymers and monomer sequences (EHE, HHE, or HHH), which were investigated by using conductivity, GPC, H-1-NMR, and C-13-NMR. The results indicated that the slump flow of cement paste mixed with 52EPC4 was increased quickly within 120 min, while 52IPC4 doesn't change within 240 min. Concrete mixed with 52IPC4 had the best slump-retention performance reaching 440 mm after 150 min, but concrete mixed with 52HPC4 was almost no fluidity after 120 min which had the largest slump flow loss through time than that containing other PCEs, and the conductivity of 52IPC4 aqueous solution decreased more slowly than other PCEs. Because of the highest content of effective PCE polymers, and the largest steric hindrance to ester bond resulting in the concrete had the best slump-retention performance when mixed with 52IPC4, because of the smallest steric hindrance to ester bond resulting in the fastest increase spread flow of cement paste which mixed 52EPC4, because of the highest content of low molecular polymers and the lowest content of effective PCE polymers in 52HPC4 resulting in the smallest initial slump flow of concrete, and the largest slump flow loss through time of concrete, even though the steric hindrance effect was larger than 52EPC4.