Analysis and Experimental Verification of the Sealing Performance of PEM Fuel Cell Based on Fractal Theory

Aiming to accurately predict the leakage rate of the sealing interface, this work proposes a two-dimensional finite element model of a proton exchange membrane fuel cell, which includes the microscopic surface morphology and the asperity contact process of the components. First of all, we constructed the surface morphology of the seal by the two-dimensional W-M (Weierstrass-Mandelbrot) fractal function and explored the influence of fractal dimension (D) and scale parameter (G) on the surface profile. Furthermore, the finite element method and Poiseuille fluid theory were adopted to obtain the deformation variables of the asperity under different clamping pressures and leakage rates. Moreover, we quantitatively analyzed the impact of surface roughness on the clamping pressure and leakage rate. It was found that both the surface amplitude and surface roughness are positively correlated with G and negatively correlated with D. Surface morphology is proportional to D but has no relationship with G. Additionally, the deformation asperity decreases exponentially with growing clamping pressure, and the leakage rate is consistent with the experimental values at a clamping pressure of 0.54 MPa. With the same leakage rate, when the seal surface roughness value is less than 1 mu m, a doubled roughness value leads to an increase of 31% in the clamping pressure. In contrast, when the surface roughness of the seal is greater than 1 mu m, a doubled roughness value induces an increase of 50% in the corresponding clamping pressure.