Comparison of nano-silver solder joints and SAC305 based on ANSYS simulation and life prediction

With the rapid development of microelectronic interconnection technology, the reliability requirements of electronic products are becoming higher and higher. Among them, temperature has the greatest impact on electronic devices. Due to the different coefficients of thermal expansion (CTE) between the many materials of a chip, the inside of a solder joint is subjected to cyclic temperature action. Under the effect of cyclic temperature, the solder joints are subject to internal fracture resulting in the failure of the solder joint. Therefore, it is necessary to find a more reliable material for the solder joint. In this paper, the advantages and disadvantages of pure silver material and low silver material are compared by finite element simulation analysis of nano-silver pure silver material and SAC305 low silver material, and the fatigue life prediction of nano-silveris predicted by a life prediction model. Then, using the Electric Power Research Institute estimation method to estimate the fatigue life of solder joints, the results are compared with those calculated by the finite element method.