Pulse shape discrimination and spectral performance of an inverted coaxial point contact HPGe detector with sub-pF capacitance

The inverted coaxial point contact high purity germanium (ICPC HPGe) detector exhibits the advantages of large volume, low depletion voltage, small capacitance, and excellent pulse shape discrimination (PSD) capability. An ICPC detector prototype with 0.9 pF capacitance was successfully fabricated and tested in this study using two different front-end electronics. The detector weighted approximately 1.5 kg and the depletion voltage was only 1800 V. The optimized operating voltage was found to be 2500 V and the leakage current was 7 pA. The detector was first connected to a homemade JFET based front-end with a pulsed reset design to minimize parallel noise. An energy resolution of 1.72 keV (full width at half maximum) was achieved at 1332 keV, demonstrating the good charge collection efficiency of the detector. An RC feedback front-end circuit was employed to test the PSD properties using a 228Th source. The PSD capability is similar to that of typical broad energy or point contact HPGe detectors, but is notably improved when the charge trapping is corrected using the drift time.