All-printed Multiplexed Electrocatalytic Biosensors with Rationally Designed Nanoparticle Inks.

Inkjet printing, capable of rapid and template-free fabrication with high resolution and low material waste, is a promising method to construct electrochemical biosensor devices. However, the construction of fully inkjet-printed electrochemical biosensor remains a challenge owing to the lack of appropriate inks, especially the sensing inks of bioactive materials. Herein, we demonstrate a fully inkjet-printed, integrated and multiplexed electrochemical biosensor by combining rationally designed nanoparticle Inks. The stable gold (Au) nanoparticles ink with lower sintering temperature is prepared by using L-cysteine as stabilizer, and it is used to print the interconnects, the counter electrodes, and the working electrodes. The SU-8 ink is used to serve as dielectric layer for the biosensor, whereas the silver electrode is printed on the Au electrode by using commercially silver nanoparticles ink before it is chlorinated to prepare Ag/AgCl reference electrode. Moreover, we synthesize an inkjet-printable and electroactive ink, by the "one-pot method", which is composed of conductive poly 6-aminoindole (PIn-6-NH2) and gold-palladium (Au-Pd) alloy nanoparticle (Au-Pd@PIn-6-NH2) to enhance the sensing performance of gold electrode towards hydrogen peroxide (H2O2). Especially, the amino groups in PIn-6-NH2 canbe further used to immobilizing glucose oxidase (GOx) and lactic acid oxidase (LOx) by glutaraldehyde to prepare printable sensing ink for the detection of glucose and lactate. The fully inkjet-printed electrochemical biosensor enabled by advanced inks can simultaneously detect glucose and lactate with good sensitivity and selectivity, as well as facile and scalable fabrication, showing great promise for metabolic monitoring. .