Simultaneous determination of femtogram levels of 237Np, 239Pu, and 240Pu in environmental solid samples using extraction chromatography and ICP-MS/MS

An analytical method based on triple quadrupole inductively coupled plasma mass spectrometry (ICP-MS/MS) was developed for simultaneous determination of femtogram levels of 237Np, 239Pu, and 240Pu in environmental samples. By carefully controlling the valence states of Np and Pu in the entire separation procedure using a simple single extraction chromatographic column (TK200), the consistent behavior of Np and Pu was achieved, allowing for the reliable application of 242Pu as the chemical yield tracer for 237Np, 239Pu, and 240Pu. A high decontamination factor of 3.2 × 107 for the most critical interfering element, uranium, was achieved in the chemical separation step. The interferences of 238U1H+ and peak tailing of 238U+ during the measurement of plutonium isotopes were effectively eliminated by utilizing 7.5 mL/min He–1.1 mL/min CO2 as reaction gases in the octupole collision/reaction cell and employing sequential quadrupole mode for mass separation in ICP-MS/MS. Specifically, the interference of 238U1H+ was reduced to 10−6 and the peak tailing of 238U+ to 10−10, surpassing the performance of measurement method without reaction gases by 3 orders of magnitude. The developed method enables the accurate determination of femtogram levels of 237Np, 239Pu, and 240Pu in the samples with U/Np and U/Pu atom ratios of up to 1017 and 1012, respectively. The developed method was validated by analyzing standard reference materials and spiked soil samples.