Catalytic gas nitriding of M50NiL steel by LaFeO3 pervoskite oxide under low-pressure conditions

To generalize the application of the LaFeO3 oxide in catalytic nitriding of steels, the M50NiL steel, a typical high-alloy bearing steel, was nitrided under low-pressure conditions. The catalytic effect of the LaFeO3 oxide on nitriding kinetics of M50NiL steel was evaluated and a new understanding of the catalytic mechanism was proposed. The microstructure, phase composition, surface morphologies and depth of nitrided layers were characterized by optical microscope, X-ray diffraction, scanning electron microscope and microhardness tester, respectively. The wear resistance of nitrided layers was evaluated by a pin-on-disk wear tester and the chemical bonds on nitrided surfaces were identified by X-ray photoelectron spectroscopy to analyze the process of nitriding reactions. The results show that the LaFeO3 catalytic nitriding was suitable for M50NiL steel. The LaFeO3 catalytic nitriding could dramatically improve the toughness of nitrided layer via the suppression of nitrides formation. The adsorption and decomposition of NHx species on the LaFeO3 oxide were alternatively occurred on La-O terminated surfaces and Fe-O terminated surfaces, resulting in the fluctuate nitrogen concentration and rapid diffusion of active nitrogen atoms. The nitriding kinetics greatly depended on the oxidation state of nitrided surfaces. Namely higher oxidation capacity corresponded to higher nitriding efficiency.