Method study on failure probability and uncertainty analysis of stress corrosion cracking in fixed parts of PWR

To estimate the failure probability of stress corrosion cracking (SCC) in the fixed parts of pressurized water reactors (PWR), an approach based on the Paris model was developed and its uncertainty analysis was performed as well. In the study of SCC failure, the uncertainty of fracture toughness was translated into integral form to improve calculation efficiency. Moreover, uncertainty parameters such as crack size and Paris model coefficients were studied in the uncertainty analysis. On this basis, the thermowell of the pressurizer of PWR as an example was analyzed in this study. The Monte Carlo (MC) method and polynomial chaos expansion (PCE) approach were used to calculate the mean value, relative uncertainty, upper limit of tolerance interval of failure probability, and sensitivity coefficient of input parameter to compare the advantages and disadvantages of these methods. According to the results, compared with the other method, 300 sets of sampling with Latin Hypercube sampling (LHS) and Sobol sequences can converge the mean, and 300 sets of sampling with Halton sequence and Hammersley sequence can converge the relative uncertainty. When LHS with the 4th order Wilks' formula and Halton sequence with the 1st order Wilks' formula to compute the upper limit of tolerance interval, the accuracy and cost of the computation can be balanced. According to the results of the sensitivity analysis, crack aspect ratio is the most sensitive parameter. PCE surrogate model can accurately calculate the mean, relative uncertainty, the upper limit of tolerance interval and sensitivity coefficient, thereby reducing the computational cost.