Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

In conventional duplex titanium (Ti) alloys, the soft primary α-precipitates (αp) are beneficial to ductility with the loss of high yield strength, while the continuous α-precipitates at grain boundaries (GBs, αGBs) often accompanied with α precipitate-free zones (α-PFZs) renders the strain incompatibility for limited ductility. Here, to overcome this longstanding issue, we utilize interstitial (O and N) atoms to notably strengthen the α-phase, and simultaneously architect the multi-morphologic secondary α-precipitates (αs) so as to improve the strain compatibility nearby GBs, thus develop a Ti-4.1Al-2.5Zr-2.5Cr-6.8Mo (wt.%) alloy with ultra-high yield strength of ∼1580 MPa and good ductility of ∼8.2%. The phase boundaries between the hard α-precipitates and the soft β-matrix not only act as dislocation barriers for strengthening, but also as sustainable dislocation sources for ductilizing to achieve a good combination of strength and ductility in our Ti alloys. This strategy not only sheds light on the understanding of the strength-ductility synergy of duplex Ti alloys, but also offers an available pathway to design ultra-strong and ductile alloys.