A multi-scale ground and drone-borne magnetic survey approach for the detection and investigation of archaeological structures

<p><span>Ground magnetic surveys are commonly used for imaging near-surface structures in archaeological studies. Usually, surveys are conducted using vertical component gradiometers or scalar gradiometers to produce a vertical pseudo-gradient map. Scalar magnetometers can also be used, albeit less frequently, to produce maps of the total magnetic anomaly. In all these cases, the equipment is pushed or pulled by an operator or carried behind a vehicle. Here we present a third approach made available by the use of three-component fluxgate magnetometers: fast surveys over large areas using a compact lightweight drone flying automatically 1 to 2 m above the ground and high precision surveys acquired by an operator 0,2 to 1 m above the ground. A case study on the gallo-roman site of Oedenburg, </span><span>located</span><span> along the Rhine River in its upper valley, illustrates the results that can be obtained with the approach. A comparison with previously acquired pseudo-gradient surveys show</span><span>s</span><span> that the presented method allows a faster coverage, a greater resolution for the imaging of short wavelength structures (such as walls) and a better capacity of imaging large wavelength structures (such as pathways, palaeochannels or soil composition variations). As the site is crossed by a high voltage electric power line, a method to suppress the high-amplitude 50 Hz frequency magnetic field is presented.</span></p>