Preparation of high-performance polyurethane elastomers via direct use of alcoholyzed waste PET by high molecular weight polyester diols

Products obtained by alcoholysis of waste PET are promising raw materials for the synthesis of polyurethane elastomers (PUEs). Alcoholysis of PET by low molecular weight diols such as ethylene glycol yields low molecular weight products. The latter need to be polymerized to high molecular weight polyols which are subsequently used as soft segments for the synthesis of PUEs. This work aims to look for suitable high molecular weight diols for the alcoholysis of waste PET to yield high molecular weight products which can be directly used as soft segments for the synthesis of PUEs. This approach allows to save the polymerization step for the formation of high molecular weight polyols. Specifically, polyester diols such as polycaprolactone diol (M-n = 2000) were used for the alcoholysis of waste PET. The resulting PUEs exhibited very good mechanical properties: a tensile strength of up to 40.95 MPa, an elongation at break of up to 1219%, and a toughness of up to 237 MJ.m(-3), along with good transparency and thermal stability.