Effect of the arrangement of two nozzles on morphology, velocity, and particle size distribution of artificial snow-making spray field

A decline in natural snow due to global warming increases the reliance of ski resorts on artificial snow. To improve the formation rate and snow amount of artificial snow under any environmental conditions, it is necessary to use atomization technology that maintains the size of liquid drops of the snow-making spray field below a critical size, thus maximizing the number of freezing droplets into ice crystals. Here, we study the effects of the gas-liquid mass-mixing ratio (GLR) and the spacing (d) between two nozzles on the characteristics of the snow-making spray field produced by atomization technology for GLR of 0.05, 0.10, 0.15, and 0.2 and d of 5, 10, 15, and 20 cm. The measurement of the morphology, velocity, and particle-size distribution of the snow-making spray field is conducted by a laser particle-size measuring instrument, particle image velocimetry, and a high-speed camera. Our results show that both the spray cone and the intersection angles increase with the increase in the GLR in a two-nozzle arrangement, while the degree of interference between the nozzles increases with the decrease in spacing, d. We also find that the inward offset of the spray is the main reason for the increase in the intersection angle and the interference area and the deviation of the spray midline. In addition, we compare the characteristics of the spray field produced by the single and the two-nozzle systems. We conclude that the flow-field velocity of the single nozzle is smaller than that of the two nozzles and the velocity gradient of the liquid drops in the two-nozzle flow field varies greatly. The maximum vorticity (Max = 147) in the case of the two-nozzle arrangement is much larger than that of the single nozzle. Moreover, by analyzing the two-nozzle flow field at different spacings, we find that the particle-size distribution is most uniform for GLR = 0.10 and d = 15 cm. Thus, our study elucidates the characteristics of spray fields suitable for snow-making toward achieving higher quality and more efficient snow-making processes.