A Study on The Carriers Compound Multi-Stage MBBR Biological Treatment Process for Domestic Sewage

Biocarriers are a key factor in moving bed biofilm reactors (MBBR) for domestic wastewater treatment and studies targeting biocarriers can be explored in more depth. In this study, two different types of biocarriers, namely anaerobic microbial carriers (AMC) and porous biogels (PBG), were used to treat real domestic wastewater and acted on a lab-scale tertiary MBBR system. The effects of the start-up process, water quality degradation, secondary start-up, and organic loading rate (OLR) on MBBR performance at room temperature (19-24 C-?) and the same filling ratio (40%) were investigated, as well as the calculation of sludge yield. The results showed that the AMC-PBG/MBBR biological treatment process could complete the start-up process quickly in a short time and the OLR was finally determined to be 1.5 kgCOD/(m(3).d). In this case, the system was able to operate stably and complete the secondary start-up relatively quickly, with 80% and 95% removal of COD and NH4(+)-N, respectively. The biofilm was characterized by scanning electron microscopy (SEM) and high-throughput sequencing which revealed the changes of microorganisms in the biofilm during operation, among which the dominant phyla were Euryarchaeota and Proteobacteria. Finally, the apparent production of process sludge was monitored and calculated to be 0.043 kgMLSS/kgCOD which is a significant reduction in sludge compared to the conventional activated sludge method. These conclusions provide valuable information for the full-scale treatment of domestic wastewater.