Study on the Corrosion Behavior of D36 Steel Plate and H62 Copper Alloy Net for Marine Aquaculture Facilities in Simulated Seawater

Marine aquaculture facilities have been working in a high salt and humidity marine environment for a long time, which makes them be inevitably affected by seawater corrosion, especially the main structures such as metal mesh and frame. Therefore, studying the corrosion behavior of net and frame steel is of great significance for the selection of materials and corrosion protection of marine aquaculture facilities. The influence of NaCl concentrations and immersion state on self-corrosion behavior and the influence of layer thickness and overlapping area on galvanic corrosion behavior of H62 copper alloy mesh/D36 steel plate was discussed in this study using weight loss and electrochemical measurements. The tensile tests were conducted to observe the influence of different corrosion conditions on maximum force and tensile strength of the net. The corrosion rate of the two materials increased rapidly with the increase of NaCl concentrations; the corrosion rate of both materials showed the decreasing trend with the extension of time, and the corrosion rate of H62 was always lower than D36 steel. When two materials were coupled, the galvanic corrosion rate would decrease with the increase of the layer thickness and overlapping area. The tensile results were consistent with the corrosion results. When these two materials work together, adding layer thickness or increasing the overlapping area is one of the ways to protect the frame steel to a certain extent.