An Improved Acid Fracturing Design through RoqSCAN Technology: A Case Study from Daniudi Gas Field in Ordos Basin, China

The concept of geological engineering-integrated fracturing is widely applied in the conventional and unconventional reservoirs, aiming to achieve efficient and economic development. There is no doubt that fine reservoir evaluation is the basis and core of geological engineering-integrated fracturing. Therefore, in this paper, we performed a series of investigations on the basis of formation fine evaluation by using RoqScan technology. Firstly, the physical parameters of the target well located in Daniudi Gas Field were evaluated by a laboratory test and logging interpretation. Next, the composition and function of the RoqSCAN tool were introduce in detail. Furthermore, the elements, minerals, and rock mechanical parameters of the target well were evaluated by the RoqSCAN tool. Finally, the fine reservoir model was established on the basis of fine formation evaluation. Moreover, we conducted a series of research on porosity and principal stress of the target formation to compare the difference between the fine model and the conventional model. Based on the fine reservoir model, the acid-fracturing design and numerical simulation were further investigated. The results of experiments and numerical simulation mainly achieved the following findings: 1. The porosity and permeability of the target formation indicated that it was a tight, low-permeability reservoir; 2. According to the comparison of the distribution for different parameters in the target well, the modeling with fine reservoir evaluation had higher accuracy than the traditional modeling; 3. Based on the fine evaluation results, acid fracturing is recommended as a stimulation method to enhance the productivity of the target formation. This study provides an essential method for the integrated fracturing design of geological engineering.