Friction stir welding of AISI 316LN high strength austenitic stainless steel for cryogenic application

Abstract Friction stir welding (FSW) is a solid state joining process that uses the heat generated by the friction of a rotating tool and the base material to join materials together. Due to the fact that the material is never melted, and that extensive plastic deformation is introduced in the weld seam, a unique set of properties is achieved. The technique has been extensively used to join aluminium and aluminium alloys, but very few developments are reported on high strength austenitic stainless steel, which is the material of choice for many high energy physics and fusion magnets. This paper contains a comprehensive microstructural and mechanical characterization, including at cryogenic temperature, of an 8 mm thick high strength austenitic stainless steel plates. The steel grade is the high alloy version of AISI 316LN (identified as 1.4429 or -X2CrNiMoN17-13-3 according to European standards). Special attention was given to cryogenic elastic – plastic J – integral testing of the weld seam. To the authors’ knowledge, this is the first time fracture toughness at cryogenic temperature on friction stir welded 1.4429 has been measured.