Rationally Designed PGM-Free Catalyst MEA with Extraordinary Performance

Platinum group metal (PGM) catalysts are the major electrocatalysts for oxygen reduction reaction (ORR) in the polymer electrolyte membrane fuel cells (PEMFCs). However, the high cost of PGM catalysts is the major huddler for the widespread applications of fuel cell electric vehicles. To remove this cost obstacle of fuel cell commercialization, PGM-free catalysts have been considered as the replacement of PGM catalysts for ORR because of the low cost and relatively comparable performance with PGM catalyst. Fe-C-N complex is the one of the most active centers in PGM-Free catalyst groups. This type of catalyst shows excellent activity characterized using the rotation disk electrode (RDE), i.e., the half wave potential (E1/2 ) could reach 0.91 V versus standard hydrogen electrode (SHE). However, in a membrane electrode assembly (MEA), the performance of PGM-Free catalysts cannot achieve the comparable performance to PGM catalyst. Since there are so many differences between PGM-free, and PGM catalysts e.g., activity, stability, surface conditions, particle size etc. The fabrication of PGM-Free catalyst MEA cannot simply borrow the methods from that of making PGM MEA. In addition, the thicknesses of catalyst layers of PFM-free are significantly thicker than that of PGM, i.e., 10 times. Hereby, we proposed a novel method of fabricating PGM-Free catalyst MEA, so that the intrinsic catalyst activity from RDE can be translated into MEA performance. The method is based on the catalyst coated membrane (CCM) method using optimized ionomer to carbon (I/C) ratio and solvent mixture of catalyst ink. Such method pushes PGM-free MEA first ever achieved the current density of 50.8 mA cm-2 at 0.9 V iR-free in H2/O2 and over 150 mA cm-2 at 0.8 V in H2/air, which surpassed the 2025 performance targets of US Department of Energy (DOE) for PGM-Free catalyst MEA. Further, the property (solvent composition, dispersion of catalyst and ionomer in an ink), structure (pore structure) and the MEA performance have been characterized using mercury intrusion porosimetry (MIP), MEA testing. A property-structure-performance relationship has been established.