Measurement of Local Void Fraction of Air Water Flow in the 8 x 8 Rod Bundle Using High-Resolution Gamma-Ray Tomography

High-resolution two-phase flow data in the rod bundle are important in the development and validation of high-fidelity models for computational fluid dynamics and subchannel codes, in particular, those pertaining to light water reactor cooling systems. The Michigan Adiabatic Rod Bundle Flow Experiment (MARBLE) has been constructed as a modular assembly of an 8 x 8 lattice rod bundle to simulate scaled pressurized water reactor and boiling water reactor subchannel assemblies. To establish a high-spatial resolution database of the void fraction in the reactor fuel assembly geometries, tomographic measurements were performed with the High-Resolution Gamma-ray Tomography System, which was designed and built in house; the detector system has a spatial resolution of less than 1.0 mm using 240 LYSO (Lu1.8Y0.2SiO5) scintillators with a fan-beam array. In the present study, the local void fraction was measured with the MARBLE facility under various air-water flow conditions (j(g) = 0.04 to 0.85 m/s and j(l) = 0.12 to 0.77 m/s) covering from bubbly to cap-turbulent flows. The local void fraction was also successfully measured under nonuniform and asymmetric air bubble distribution conditions with an investigation of the effect of spacer grids and mixing vanes on void drift across subchannels.