Large eddy simulation of film cooling flow from diffusion slot hole with crossflow coolant configuration

PHYSICS OF FLUIDS(2023)

引用 1|浏览3
暂无评分
摘要
A three-dimensional compressible large eddy simulation (LES) method was performed to explore the flow and heat transfer characteristics in the hole and mixing zone of a crossflow film cooling model. A traditional cylindrical hole and diffusion slot hole were selected as the cases for the film hole. The characteristics of the crossflow film flow-field and the influence of the internal crossflow on the film cooling of the diffusion slot hole were explained by the vortex flow in the hole and the instantaneous/time-averaged jet mixing. The results showed that helical motion is easily induced in the holes under the influence of crossflow. Asymmetric outlet flow behavior is the main reason for the asymmetric characteristics downstream of the hole. The difference in the blowing ratio results in the difference in the strength of the spiral vortex and the central vortex tube inside the hole. For the diffusion slot hole, the high-speed zone caused by the crossflow effect at the hole-inlet gradually evolves into strip shapes under the combined action of axial extrusion and spanwise diffusion. With the disappearance of the helical structure, the high-speed areas gradually converge on both sides of the hole exit in the span direction, and the streamline at the exit develops relatively smoothly. The inlet crossflow and the crossflow Reynolds number have little effect on the film cooling effectiveness of the diffusion slot hole. With an increase in the blowing ratio, the lateral diffusion capacity of the film is gradually enhanced. Furthermore, compared with the cylindrical hole, the instantaneous film fluctuation region of the diffusion slot hole case is smaller in range and more symmetrical in distribution. These findings advance the understanding of the film cooling of diffusion slot holes.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要